Concrete Waterproofing Systems

  • Easy to mix and apply

  • Excellent bonding capability

  • High flexibility

  • Breathable

  • Excellent water-resistant barrier

  • Seamless coating system

  • Abrasion & weather resistance

  • Works with both negative and positive side pressure

APPROXIMATE COVERAGE

2KG/ sq.m to 2.5 KG/ sq.m for 2 coatings depending on the substrate conditions and application efficiency.

SHELF LIFE

POT LIFE

DRYING TIME

1 Year

2-3 Hours

1-2 Hours

1. SURFACE PREPARATION

2. MIXING

3. APPLICATION

4. CURING

The areas to be treated must be sound, clean, dry, and free of any debris or contaminations. Any cracks or holes in the surface should be repaired before applying the material.

HYROSEAL comes in a two-pack components. Part A is a powder, and Part B is a liquid. The two components MUST NOT be divided. Part A and Part B MUST be mixed together.

Part B (Liquid) Must be shaken well and poured into a non-absorbing pail. Gradually add Part A (Powder) and use a slow-speed drill and mixing paddle for 5 minutes until fully-homogenous consistency is achieved.

Apply HYDROSEAL Cementitious Waterproofing to the surface using a brush or roller. Work in a small sections, applying the material evenly and smoothly.

Apply the first coat and work generously to fill all the pores and honeycombs, let it dry before applying the 2nd coat perpendicularly.

Curing should be done at least 24 to 72 hours before laying concrete topping, exposing to traffic, or starting the ponding test.